I've been busy making a wobbler engine -I wasn't too sure it was going to work so I didn't take much "during" pictures - but here's a video of me testing the function :)

Here's an updated video of the completed engine running on about 15 PSI :) I made the frame for the engine on my homemade CNC machine and all the other parts were made on my Enco 3-in1 mill dill lathe.

Most of the engine was made on the manual lathe and mill - but I did make the frame on the CNC machine :)

and here's some pictures!

{rokbox album=|wobbler|}images/stories/Wobbler/*.jpg{/rokbox}